What to look for in a cot
Printed From: OHbaby!
Category: Product Reviews
Forum Name: Product Reviews
Forum Description: Cot or bassinette? Which pram is best for you? How about nappies? Check out our Product Reviews board to find out what other Mums and Dads think and share your thoughts!
URL: https://www.ohbaby.co.nz/forum/forum_posts.asp?TID=10099
Printed Date: 06 May 2025 at 11:36am
Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com
Topic: What to look for in a cot
Posted By: lilfatty
Subject: What to look for in a cot
Date Posted: 22 August 2007 at 2:22pm
|
Hi all ... I'm currently looking into purchasing a cot (Im trying to get the big two out of the way, cot and pram). Can anyone give me any ideas on what I should be looking for? We thought we might just rent one of those ez rocker bassinette things for the first few months which would save buying a bassinette so thats sorted...but apart from a white cot Im not sure what features I should be looking for in a cot (especially since Im going to try and get one 2nd hand). Thanks soo much in advance, this oh baby forum has been a saving grace since Ive found it. ------------- Mummy to Issy (3) and Elias (18 months) I did it .. 41 kgs gone! From flab to fab in under a year  http://www.femininefitness.co.nz/category/blog - LFs weight blog
|
Replies:
Posted By: kell
Date Posted: 22 August 2007 at 2:28pm
|
We have our boy in an ezee rocker, its fab! Kayla was in it too. We brought the stand that goes with it so we could have them in our room for the first wee while and now James is in his cot in it. It has been well worth the money and we got it quite cheap on TM.
Our cot we got new but off a lady who sells them on TM, its great! Buying second hand you want to check all the screws are there, the paint or vanrnish is safe and non toxic, it has no nobbly bits on the tops of the corners and the spaces between the gaps is safe. I would buy a new mattress too. You could be surprised how much a new cot is? I can PM you who we got ours from  ------------- Kayla Rose is now 4! James Sydney is nearly 2! |
Posted By: lilfatty
Date Posted: 22 August 2007 at 2:31pm
|
That would be fantastic! I figured I would have to get a new matress for the cot so I factored that into our budget My husband wants to buy an ez rocker, but I thought we could at least hold off on the stand until the next one comes and we could just clip the ez rocker into the cot for now (as when the next one comes, this one will be asleep in the cot ... hey a new form of bunk bed lol) The cot will be in our room .... I cant bear the thought of having her in another room (well at least at first) ------------- Mummy to Issy (3) and Elias (18 months) I did it .. 41 kgs gone! From flab to fab in under a year http://www.femininefitness.co.nz/category/blog - LFs weight blog
|
Posted By: kell
Date Posted: 22 August 2007 at 2:32pm
|
lol Bunks! I'll PM you now
We only got the stand cause we got it for a very good bargain! ------------- Kayla Rose is now 4! James Sydney is nearly 2! |
Posted By: caliandjack
Date Posted: 23 August 2007 at 9:40am
|
I noticed at baby city they had convertible cots, convert to junior bed, day bed.
Has anyone got one of these, and have you used the extra features or are they a waste of $$. Also some cots have rails on the ends, and some are solid which is best? I liked the solid ends myself. ------------- http://lilypie.com" rel="nofollow">   [/url] Angel June 2012 |
Posted By: Guests
Date Posted: 23 August 2007 at 9:54am
|
We have the bed that converts, but we are still in the standard cot, we have not taken the sides off yet, Tyrell sleeps all over the place so just waiting a bit longer. We took a while to choose our cot, but went with a pretty standard 1, we were lucky enough to be given the cot as a present. I would have gone for one with open ends, but we were given 1 with solid ends. |
Posted By: Helen21
Date Posted: 23 August 2007 at 4:03pm
| We bought a cot on trade me and didn't think to ask how big the gap between bars was really wide I think the standard is ment to be no wider than a can of coke so they can't get their heads stuck. |
Posted By: emz
Date Posted: 23 August 2007 at 4:18pm
|
You should look at what mechanism the sliding side has, if it uses one hand or two, if it has 2 levels (quite handy apparently), teething rails are good but not essential (I assume you could get these put on if you wanted to?)
Fleury - I don't think solid or slatted ends make much difference apart from the look. It might if you had the end of bubs cot near a drafty window, but I would hope you would have the draft blocked anyway before you put bubs there. Solid ones tend to be more expensive unless you compromise on the look too (I've just come back from cot and pram shopping with my checklist, can you tell?  )
|
Posted By: Bizzy
Date Posted: 23 August 2007 at 4:48pm
we have a convertible one but havent had a chance to convert yet as we keep having babies...!!!
My 2 yr old is still in it as a cot and we plan to take the sides off soon... if you buy second hand be careful of the size... i think a lady on here got a cot but that had to have a special size mattress made for it...and had a few problems getting one. IMO you would probably be better off getting a new one - you can get them quite cheap on sale - esp if you plan on more than one child or it converts to a bed. |