Bubblebubs Troubleshooting
Printed From: OHbaby!
Category: Product Reviews
Forum Name: Cloth Nappy Discussion
Forum Description: Are you new to cloth nappies? Looking for washing tips? Want to rave about a great new nappy you've tried? By popular request a board especially for all our cloth Mums!
URL: https://www.ohbaby.co.nz/forum/forum_posts.asp?TID=11258
Printed Date: 27 July 2025 at 5:09pm
Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com
Topic: Bubblebubs Troubleshooting
Posted By: mothersinstinct
Subject: Bubblebubs Troubleshooting
Date Posted: 04 October 2007 at 10:31pm
|
I noticed there are a few that are having some issues with the Bubblebubs leaking so wanted to just run a few things past you so they start working better.
I have just recently received some more detailed instructions for Bubblebubs. Firstly, because the nappy has a blend of bamboo and hemp inside it will take a few washes for the nappy to reach its full absorbency. So probably best to keep an eye on it at home for the first times till you can trust it 
Step One: Place your nappy, inner layer facing up, on your change mat and pull each end away from each other. This will allow the leg seams to roll inwards (this is a must) The booster may be folded in half for extra absorbency (I am told this works well). Step Two: Place your baby on the nappy and pull the front of the nappy towards the waist. Step Three: Pull the touch tape tabs around your baby's body and fasten the tabs against the loop panel to secure. I hope this helps and if you have any questions I am happy to help - just drop me an email. Karyn
|
Replies:
Posted By: Spudling
Date Posted: 05 October 2007 at 8:49am
awesome, thanks Karyn, i was going to email you today to see what I was doing wrong...will keep you posted
 ------------- http://tickers.families.com"> 
http://tickers.families.com"> 
|
Posted By: peanut butter
Date Posted: 05 October 2007 at 8:56am
|
I havent really had any trouble with mine . But I just purchased another one (privately off someone who got it from OZ) and I noticed the inner "flap" looks much thinner than the one I bought from you. Do you know if this was an older design? and if so would I need more absorbancy or is it just a trick 
Thanks |