Temping Question
Printed From: OHbaby!
Category: Planning Pregnancy (trying for baby)
Forum Name: Planning Pregnancy (trying for baby)
Forum Description: Trying to get pregnant? Going through fertility treatment? Just planning your first or second child? There are many people out there in the same boat to help and listen and share with
URL: https://www.ohbaby.co.nz/forum/forum_posts.asp?TID=16677
Printed Date: 30 December 2025 at 4:51pm Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com
Topic: Temping Question
Posted By: Nefertiti
Subject: Temping Question
Date Posted: 26 April 2008 at 9:42am
I thought I'd try and temp this month (when I can remember lol).
CD 3 was 36.5 (was first day I had therm at home)
Forgot CD 4, 5, 6
Then CD 7, 8, 9, 10 have all been 36.5 aswell! Is this a common thing for everyday to be the same? I've looked at other charts and they don't seem to be like that. I bought a new thermo and have tested it at different times of the day (just to test it, not to chart), and it changes very slightly. So could my therm be faulty, or is this normal?
Thanks :)
------------- http://lilypie.com">
|
Replies:
Posted By: Konagirl
Date Posted: 26 April 2008 at 10:06am
|
do you have a thermometer that reads 2 decimal places?
|
Posted By: Nefertiti
Date Posted: 26 April 2008 at 1:27pm
It reads in 0.1 decimal places so appropriate for this. I bought it from the chemist. Its a Citizen brand.
------------- http://lilypie.com">
|
Posted By: emachan
Date Posted: 26 April 2008 at 2:40pm
If you only have a .1 decimal place thermometer you are more likely to get even temps before ovulation, so maybe if you wanted to be more precise, you could get a 2 decimal one. The cheapie I bought off trademe did me fine and I think it was about $16!
------------- http://lilypie.com" rel="nofollow">
DD#1 Sept 08 DD#2 Oct 09
|
Posted By: Nefertiti
Date Posted: 26 April 2008 at 5:11pm
Isn't .1 more accurate than .2?
Just had a look on Trademe and there is one also .1, but says:
Digital display reads in 1/100th of a degree e.g. 37.06 C
+/- 0.1 Degree accuracy
Mine doesn't read with the 2 digits at the end like that. Might get that one and just use this other one for the medicine cabinet lol
------------- http://lilypie.com">
|
Posted By: Konagirl
Date Posted: 27 April 2008 at 8:45am
That's pretty much what I've done. It's quite useful having a therm in the cupboard!
I brought a proper therm off a site in the US which was about $17 all up and has given me no problems. BBM put me onto it.
|
Posted By: emachan
Date Posted: 27 April 2008 at 2:09pm
Yeah thats what I mean with the 2 decimal places,
so instead of 36.1, you'd have more accurate temps like 36.15 or 36.19 (which could be the difference over a couple of days, rather than having 2 temps on 2 days of 36.1 - if you know what I mean! )
------------- http://lilypie.com" rel="nofollow">
DD#1 Sept 08 DD#2 Oct 09
|
Posted By: Nefertiti
Date Posted: 27 April 2008 at 4:50pm
I've ordered one from baby4you, so hopefully I can record more accurately then. Thanks for the advice :)
------------- http://lilypie.com">
|
Posted By: Konagirl
Date Posted: 27 April 2008 at 5:21pm
|
Ugh, I've had one of those and it didn't work very well. Temps all over the show.
|
Posted By: Nefertiti
Date Posted: 27 April 2008 at 10:50pm
Oh, thats the one i got!
Bought it from here, as no one was saying the other sites they went to!
Oh well, never mind.
But out of curiosity...did either of you contact baby4you to let them know of the problem?
------------- http://lilypie.com">
|
Posted By: Konagirl
Date Posted: 28 April 2008 at 8:32am
Posted By: Emmecat
Date Posted: 28 April 2008 at 8:32am
Posted By: Emmecat
Date Posted: 28 April 2008 at 8:34am
PS this is my 6th cycle using it and you can see from my charts that it's pretty consistent. Helped get me pg last month and hopefully will do so again this month 
-------------
  http://lilypie.com" rel="nofollow">
|
Posted By: Nefertiti
Date Posted: 28 April 2008 at 9:27am
OMG I just found out I have been using my thermometer all wrong!!
I was just clicking the button once to get the reading I'd done in bed (taking temp then just putting it down and reading it later).
Well, I read it this morning before putting it down and it was 36.2. Then I come back to it an hour later just to double check it and it says 36.5! Well...after actually reading the instructions, it says I have to hold the button down lol. So I did this and my correct reading came up! 36.5 was just the number that comes up each time its turned on! DUH! So now my chart looks like its taken a dive, but I have no idea now really.
Will still use new thermo once it gets here though, as after testing current one, I found it will only show last reading once, and if I get sidetracke I'll forget it lol. Plus hopefully new one will be more accurate!
Man I feel like a dutz lol
------------- http://lilypie.com">
|
Posted By: Konagirl
Date Posted: 28 April 2008 at 9:32am
I did that a bit with mine too, the first therm I brought would tell me the last measured temp if I turned it off then looked latter. I couldn't work out why for 3 days running I had the exact temp. doh.
You know to take your temp first thing in the morning, the same time everyday?
Good luck, I hope the new therm works well. I now own 3!
|
Posted By: Two Blondinis
Date Posted: 28 April 2008 at 10:11am
I set my cellphone to wake me at the exact same time every day (whether I need to get up at 6am or not), take my temp, then put the temp in the cellphone calender and load that onto FF later in the day.
This way I never forget to temp (unless Caitlin wakes at 5.30am lol) and always have a log my temps on my phone and on FF
I was using a 1 decimal place BBT and would get flat temps, I use a proper ovulation one now that I got from the chemist, temps are much better now and I got my first ovulation lines!
------------- http://lilypie.com">

|
|